Free Pattern: Celebration Countdown Christmas Tree Wall Hanging.
Christmas Tree Wall Hanging — Part 2
A festive home for your Snappy Beans! In this part of our Celebration Countdown, we’re crocheting the wall hanging base and the three layered tree pieces. So many things still to come, including a Santa sack, toppers, and final assembly!
Welcome back to Christmas in Snappyland! This is Part 2 of our free crochet-along. You can make the wall hanging, the porch goose tree, or both!
Materials and Details
Yarn: Worsted weight yarn (samples: Buff for the base, Festive for the border, and Ombré for the tree pieces).
Hook: H or I, as specified in the pattern.
Other supplies: Yarn needle for weaving in ends and sewing pieces together later.
Abbreviations: ch = chain; sc = single crochet; hdc = half double crochet; dc = double crochet; sl st = slip stitch; st/sts = stitch/stitches; sc2tog = single crochet 2 together; sk = skip.
Wall Hanging Project
- Please make all of the pieces for the wall hanging (except beans) before sewing items to the base rectangle. This will give you a chance to lay things out to determine placement.
- The project starts with the center rectangle.
This is a large wall hanging. If you would like the base to be smaller choose an H hook. It doesn’t make a big difference but will cut a couple of inches.
1. With an H or I hook and worsted weight yarn (Sample: Buff), ch 49, sc in 2nd chain from hook and in each ch across. (48sts)
2. Ch 1, turn, hdc in same st and in each st to end of row. (48sts)
For steps 3-4, the sts will be worked between the posts of the row below. This creates a more solid fabric and prevents the ridges created from working hdc back and forth in rows. See tips at the end of this pattern for placement.
3. Ch 1, turn, hdc between each post to end of row. Make sure st count remains the same. (48sts)
4. Repeat the previous row until the piece measures 22” from starting edge (approximately 61 hdc rows).
5. Ch 1, turn, sc in each st to end of row.
6. Do not turn. This step is worked around the outer edge of the rectangle. Work 2 more sc (for a total of 3sc) in last st of row #5. Sc approximately 61 sts evenly down the side of the rectangle, working 3sc in the first st of the bottom row. Sc in each st across the row/short edge of rectangle, working 3sc in last st. Sc 61sts (or same number as first long edge if different) evenly up the 2nd long side of the rectangle, working 3sc in first st of the top row/short edge. Sc in each st across, sl st in the middle corner st to join.
7. Finish off the current yarn and change to worsted weight yarn for the border (Sample: Festive). The beginning ch 2 counts as a st from this point on. (Ch 2, hdc, ch 1, 2hdc) in the same st, hdc in each st down the side of the rectangle. (2hdc, ch 1, 2hdc) in the corner st, hdc in each st across. (2hdc, ch 1, 2hdc) in the corner st, hdc in each st up the side of the rectangle. (2hdc, ch 1, 2hdc) in the corner st, hdc in each st across. Sl st in the top of the ch 2 to join.
8. Sl st into the ch 1 space at the corner. (Ch 2, hdc, ch 1, 2hdc) in the same space, hdc in each st down the side of the rectangle. (2hdc, ch 1, 2hdc) in the corner space, hdc in each st across. (2hdc, ch 1, 2hdc) in the corner space, hdc in each st up the side of the rectangle. (2hdc, ch 1, 2hdc) in the corner space, hdc in each st across. Sl st in the top of the ch 2 to join.
9. Repeat step 8 two more times or until border is desired width.
10. Sl st in each st around, working 4sc in each corner space. Finish off and weave in ends.
Note: if you tend to work sl sts tighter than other sts, be careful and try to keep the tension similar to previous sts or it will make the edges ripple.
Tree
Small/Top Piece
This starts at the top.
1. With an H or I hook and worsted weight yarn (Sample: Ombré), ch 4, 2sc in the 2nd ch from hook, sc, 2sc in the last ch. (5sts)
2. Ch 1, turn, 2sc in the same st, sc 3, 2sc in the last st. (7sts)
3. Ch 1, turn, sc in the same st and in each st to end of row. (7sts)
4. Ch 1, turn, 2sc in the same st, sc 5, 2sc in the last st. (9sts)
5. Ch 1, turn, sc in the same st and in each st to end of row. (9sts)
6. Ch 1, turn, 2sc in the same st, sc 7, 2sc in the last st. (11sts)
7. Ch 1, turn, sc in the same st and in each st to end of row. (11sts)
8. Ch 1, turn, 2sc in the same st, sc 9, 2sc in the last st. (13sts)
9. Ch 1, turn, sc in the same st and in each st to end of row. (13sts)
10. Ch 1, turn, 2sc in the same st, sc 11, 2sc in the last st. (15sts)
11. Ch 1, turn, sc in the same st and in each st to end of row. (15sts)
12. Ch 1, turn, 2sc in the same st, sc 13, 2sc in the last st. (17sts)
13. Ch 1, turn, 2sc in the same st, sc 15, 2sc in the last st. (19sts)
14. Ch 1, turn, 2sc in the same st, sc 17, 2sc in the last st. (21sts)
15. Ch 1, turn, sc in the same st and in each st to end of row. (21sts)
16. Ch 1, turn, 2sc in the same st, sc 19, 2sc in the last st. (23sts)
17. Ch 1, turn, 2sc in the same st, sc 21, 2sc in the last st. (25sts)
18. Ch 1, turn, 2sc in the same st, sc 23, 2sc in the last st. (27sts)
19. Ch 1, turn, 2sc in the same st, sc 25, 2sc in the last st. (29sts)
20. Ch 1, turn, 2sc in the same st, sc 27, 2sc in the last st. (31sts)
21. Ch 1, turn, 2sc in the same st, sc 29, 2sc in the last st. (33sts)
22. Ch 1, turn, sc2tog, sc 29, sc2tog. (31sts)
23. Ch 1, turn, sc2tog, sc 27, sc2tog. (29sts)
24. Ch 1, turn, sc2tog, sc 25, sc2tog. (27sts)
25. Ch 1, turn, sc2tog, sc 23, sc2tog. (25sts)
26. Ch 1, turn, sc2tog, sc 21, sc2tog. (23sts)
27. Ch 1, turn, sc2tog, sc 19, sc2tog. (21sts)
28. Ch 1, turn, sc2tog, sc 17, sc2tog. (19sts)
29. Ch 1, turn, sc2tog, sc 15, sc2tog. (17sts)
30. This step is worked around the outer edge. Ch 1, sc 7 sts evenly across the edge of the piece towards the widest point, 3hdc in the point (x in photo), sc 20 sts evenly across the rest of this edge. Sc in the first st at the top edge, 3sc in the next st, sc in the last st. Sc 20 sts evenly across the edge of the piece towards the widest point. 3hdc in the point (x in photo), sc 7 sts evenly across the rest of this edge. 2sc in the first st of the bottom row, sc, hdc 5, 2hdc in the next st, hdc, 2hdc in the next st, hdc 6, sc, sl st in the first st of the round to join. Finish off and weave in ends.
31. This step is worked across the bottom edge. With the same hook and yarn, start with the bottom edge away from you and at the widest point at the right. Ch 1, sc in the same st, hdc, sk 1, 6dc on the next st, sk 1, *hdc 2, sk 1, 6dc on the next st, sk 1*, repeat until 4 sts remain, hdc 2, sc, sl st. (7 scallops) Finish off, leaving a long tail for sewing to the base piece. Set aside.
Medium/Middle Piece
This starts at the top.
1. With an H or I hook and worsted weight yarn (Sample: Ombre), ch 25, sc in the 2nd ch from hook and in each ch to end of row. (24sts)
2-5. (4 rows) Ch 1, turn, sc in the same st and in each st to end of row. (24sts)
6. Ch 1, turn, 2sc in the same st, sc in each st to end of row. (25sts)
7. Ch 1, turn, 2sc in the same st, sc 23, 2sc in the last st. (27sts)
8. Ch 1, turn, sc in the same st and in each st to end of row. (27sts)
9. Ch 1, turn, 2sc in the same st, sc 25, 2sc in the last st. (29sts)
10. Ch 1, turn, 2sc in the same st, sc 27, 2sc in the last st. (31sts)
11. Ch 1, turn, 2sc in the same st, 2sc in the next st, sc 27, 2sc in the next st, 2sc in the last st. (35sts)
12. Ch 1, turn, 2sc in the same st, sc 33, 2sc in the last st. (37sts)
13. Ch 1, turn, sc in the same st and in each st to end of row. (37sts)
14. Ch 1, turn, 2sc in the same st, sc 35, 2sc in the last st. (39sts)
15. Ch 1, turn, 2sc in the same st, sc 37, 2sc in the last st. (41sts)
16. Ch 1, turn, 2sc in the same st, 2sc in the next st, sc 37, 2sc in the next st, 2sc in the last st. (45sts)
17. Ch 1, turn, 2sc in the same st, sc 43, 2sc in the last st. (47sts)
18. Ch 1, turn, sc2tog, sc 43, sc2tog. (45sts)
19. Ch 1, turn, sc2tog, sc 41, sc2tog. (43sts)
20. Ch 1, turn, sc2tog, sc 39, sc2tog. (41sts)
21. Ch 1, turn, sc2tog, sc 37, sc2tog. (39sts)
22. Ch 1, turn, sc2tog, sc 35, sc2tog. (37sts)
23. Ch 1, turn, sc2tog, sc 33, sc2tog. (35sts)
24. Ch 1, turn, sc2tog, sc 31, sc2tog. (33sts)
25. Ch 1, turn, sc2tog, sc 29, sc2tog. (31sts)
26. Ch 1, turn, sc2tog, sc 27, sc2tog. (29sts)
27. This step is worked around the outer edge. Refer to photo on page 6 for “point” st placement if needed. Ch 1, sc 8 sts evenly across the edge of the piece towards the widest point, 3hdc in the point, sc 17 sts evenly across the rest of this edge. 2sc in the first st at the top edge, sc in each st until 1 st remains on the top edge, 2sc in the last st. Sc 17 sts evenly across the edge of the piece towards the widest point. 3hdc in the point, sc 8 sts evenly across the rest of this edge. 2sc in the first st of the bottom row, sc, hdc 10, 2hdc in the next st, hdc 2, 2hdc in the next st, hdc 10, sc 2, sl st in the first st of the round to join. Finish off and weave in ends.
28. This step is worked across the bottom edge. With the same hook and yarn, start with the bottom edge away from you and at the widest point at the right. Ch 1, sc in the same st, hdc, sk 1, 6dc on the next st, sk 1, *hdc 2, sk 1, 6dc on the next st, sk 1*, repeat until 2 sts remain, hdc, sl st. (10 scallops) Finish off, leaving a long tail for sewing to the base piece. Set aside.
Large/Bottom Piece
This starts at the top.
1. With an H or I hook and worsted weight yarn (Sample: Ombré), ch 32, sc in the 2nd ch from hook and in each ch to end of row. (31sts)
2-5. (4 rows) Ch 1, turn, sc in the same st and in each st to end of row. (31sts)
6. Ch 1, turn, 2sc in the same st, sc 29, 2sc in the last st. (33sts)
7. Ch 1, turn, sc in the same st and in each st to end of row.
8. Ch 1, turn, 2sc in the same st, sc 31, 2sc in the last st. (35sts)
9. Ch 1, turn, sc in the same st and in each st to end of row.
10. Ch 1, turn, 2sc in the same st, sc 33, 2sc in the last st. (37sts)
11. Ch 1, turn, sc in the same st and in each st to end of row.
12. Ch 1, turn, 2sc in the same st, sc 35, 2sc in the last st. (39sts)
13. Ch 1, turn, 2sc in the same st, sc 37, 2sc in the last st. (41sts)
14. Ch 1, turn, 2sc in the same st, 2sc in the next st, sc 37, 2sc in the next st, 2sc in the last st. (45sts)
15. Ch 1, turn, 2sc in the same st, sc 43, 2sc in the last st. (47sts)
16. Ch 1, turn, sc in the same st and in each st to end of row.
17. Ch 1, turn, 2sc in the same st, sc 45, 2sc in the last st. (49sts)
18. Ch 1, turn, 2sc in the same st, sc 47, 2sc in the last st. (51sts)
19. Ch 1, turn, 2sc in the same st, 2sc in the next st, sc 47, 2sc in the next st, 2sc in the last st. (55sts)
20. Ch 1, turn, 2sc in the same st, sc 53, 2sc in the last st. (57sts)
21. Ch 1, turn, sc in the same st and in each st to end of row.
22. Ch 1, turn, 2sc in the same st, sc 55, 2sc in the last st. (59sts)
23. Ch 1, turn, sc2tog, sc 55, sc2tog. (57sts)
24. Ch 1, turn, sc2tog, sc 53, sc2tog. (55sts)
25. Ch 1, turn, sc2tog, sc 51, sc2tog. (53sts)
26. Ch 1, turn, sc2tog, sc 49, sc2tog. (51sts)
27. Ch 1, turn, sc2tog, sc 47, sc2tog. (49sts)
28. Ch 1, turn, sc2tog, sc 45, sc2tog. (47sts)
29. Ch 1, turn, sc2tog, sc 43, sc2tog. (45sts)
30. Ch 1, turn, sc2tog, sc 41, sc2tog. (43sts)
31. Ch 1, turn, sc2tog, sc 39, sc2tog. (41sts)
32. Ch 1, turn, sc2tog, sc 37, sc2tog. (39sts)
33. This step is worked around the outer edge. Refer to photo on page 6 for “point” st placement if needed. Ch 1, sc 9 sts evenly across the edge of the piece towards the widest point, 3hdc in the point, sc 22 sts evenly across the rest of this edge. 2sc in the first st at the top edge, sc in each st until 1 st remains on the top edge, 2sc in the last st. Sc 22 sts evenly across the edge of the piece towards the widest point. 3hdc in the point, sc 9 sts evenly across the rest of this edge. 2sc in the first st of the bottom row, sc, hdc 15, 2hdc in the next st, hdc 3, 2hdc in the next st, hdc 15, sc 2, sl st in the first st of the round to join. Finish off and weave in ends. Finger shape the edges to smooth the shape if needed.
34. This step is worked across the bottom edge. With the same hook and yarn, start with the bottom edge away from you and at the widest point at the right. Ch 1, sc in the same st, hdc, sk 1, 6dc on the next st, sk 1, *hdc 2, sk 1, 6dc on the next st, sk 1*, repeat until 2 sts remain, hdc, sl st. (13 scallops) Finish off, leaving a long tail for sewing to the base piece. Set aside.
More Snappy Celebration Countdown Fun!
Keep your wall hanging and tree pieces ready! The Santa sack, toppers, and finishing details will be shared in Part 4.
Want to make the tiny friends that hang on the tree? The Snappy Beans pattern is already available!
Happy crocheting! ❤️ Heidi
© 2026 Snappy Tots. This pattern is copyright Snappy Tots and may not be copied, shared, or reproduced in part or whole. Please share the link to this original blog post instead. Items made from this pattern may be sold for profit.
