Boy & Girl • 17-inch sample • 17/19-inch collection
Boy and girl Christmas elf goose costumes.
Give your smaller goose a Christmas makeover! This pattern includes the sweater, pointed collar, elf hat, and plenty of optional details for making your own festive character.
Prefer a Printable PDF?
Enjoy the free instructions below, or purchase the downloadable pattern.
Choose Option A for the straight bottom section. Add a belt buckle, pointed collar, and elf hat.
Girl Elf
Choose Option B for the flared, striped skirt. Add the optional hair, ringlets or braids, and elf ears if you like.
Pattern note: The original PDF was designed for a 17-inch goose statue. Check the measurements and gauge for your particular goose.
Materials and Details
Materials and Details
● Yarn: 170 yards worsted weight yarn.
Sample yarns: Sweater – 100 yards Red
Heart Paddy Green; 50 yards Cherry, 20
yards black, small amounts white and gold
● Crochet Hook: I (5.5mm)
● Supplies: Yarn needle for weaving in ends
● Optional: Measuring tape, scissors, 5 small
jingle bells (¼”); 5 medium jingle bells (½”)
● Optional: Measuring tape, scissors
● Gauge: 4” with an I hook = 14 hdc sts and
10.5 rounds
● Measurements (measured flat): Boy – 8.75”
tall x 8.75” across the widest point; Girl – 9”
tall x 13” across the widest point
Tips
Tips
● The first stitch of each round is worked into the
same stitch as the turning chain unless noted.
● Numbers at the beginning of each line may
refer to steps and not indicate the number of
rows/rounds.
● Stitch count remains the same unless noted at
end of row/round.
● If you have any questions about this pattern please contact [email protected].
Fit Information
This is designed for a 17” goose statue like the one sold by Miles Kimball:
https://www.mileskimball.com/buy-gaggleville-porch-goose-baby-17-h-statue-377693
Goose measurements: 14 1/2" long x 7" wide x 17" high
Sweater – both versions
Sweater – both versions
This starts at the neck and is worked towards the bottom.
1. With an I hook and worsted weight yarn (Sample: Green), ch 28, sl st in the last ch from hook to form a circle.
Make sure the chain is not twisted. (28sts)
2. Ch 1, hdc in the same st and in each st to end of round, sl st to join.
3. Ch 1, *hdc 6, 2hdc in the next st*, repeat to end of round, sl st to join. (32sts)
4. Ch 1, *hdc 7, 2hdc in the next st*, repeat to end of round, sl st to join. (36sts)
5. Ch 1, *hdc 8, 2hdc in the next st*, repeat to end of round, sl st to join. (40sts)
6. Ch 1, *hdc 9, 2hdc in the next st*, repeat to end of round, sl st to join. (44sts)
7. Ch 1, *hdc 10, 2hdc in the next st*, repeat to end of round, sl st to join. (48sts)
8. Ch 1, *hdc 11, 2hdc in the next st*, repeat to end of round, sl st to join. (52sts)
9. Ch 1, *hdc 12, 2hdc in the next st*, repeat to end of round, sl st to join. (56sts)
10. Ch 1, hdc in the same st and in each st to end of round, sl st to join.
11. Repeat the previous round 4 more times.
12. Change to worsted weight yarn for the belt (Sample: Black). Ch 1, hdc in each st to end of round, sl st to join.
13. Ch 1, hdc in each st to end of round, sl st to join.
At this point, choose one of the following options for finishing the sweater:
Option A: straight
14. Change to worsted weight yarn for the bottom section (Sample: Red). Ch 1, hdc in each st to end of round, sl st
to join.
15. Repeat the previous round for an additional 3 rounds.
16. Loosely sl st in each st to end of round. Finish off and weave in ends.
Option B: skirt (see photo on last page)
14. Change to worsted weight yarn for the first stripe after the belt (Sample: Red). Ch 1, *hdc 13, 2hdc in the next
st*, repeat to end of round, sl st to join. (60sts)
15. Change to worsted weight yarn for the next stripe (Sample: Green). Ch 1, *hdc 2, 2hdc in the next st*, repeat to
end of round, sl st to join. (80sts)
16. Change back to the first color (Sample: Red). Ch 1, *hdc 3, 2hdc in the next st*, repeat to end of round, sl st to
join. (100sts)
17. Change back to the second color (Sample: Green). Ch 1, *hdc 4, 2hdc in the next st*, repeat to end of round, sl
st to join. (120sts) Finish off the current yarn and change to the first color.
18. Change back to the first color (Sample: Red). Ch 1, *sc 3, ch 3, sl st in the same st*, repeat to end of round, sl st
to join. Finish off and weave in ends.
Girl elf skirt option.
Buckle and Collar
Buckle detail.
Buckle: Choose from one of the following
Crocheted version: photo at right
With an H hook and worsted weight yarn (Sample: golden yellow), ch 29, sc in 2nd ch
from hook, sc 2, sc2tog, sc2tog, *sc 3, sc2tog, sc2tog*, repeat to end of chain. ((20sts)
Finish off, leaving a long yarn tail for sewing in place.
Finger shape the buckle piece into a square, overlapping the short ends and centered
over the belt section.
With a yarn needle, use the yarn tail to sew the buckle in place.
Stitched version: photo at right
Pull a long piece of worsted weight yarn (Sample: golden yellow) through a yarn needle until the ends match up.
Tie a knot.
● Stitch a square around the belt/hatband to create the buckle with this double strand of yarn.
● After the square is complete, work on TOP of the suit(not up and down to the inside of the piece), slide the
yarn needle under the next st. Photo top right.
● Pull the needle through until the yarn is snug. Repeat for each st working around the square. Photo below,
bottom.
Collar
1. With an I hook, attach worsted weight yarn (Sample: red) to a stitch on the top edge (beginning round) of the
suit. Ch 1, *sc 13, 2sc in the next st*, repeat once, sl st to join. (30sts)
2. Ch 1, FPSC around each post to end of round, sl st to join. Note: yes I know there isn’t much of a post with an sc
st, but this works really well to create the peaks and have the collar lay flat.
3. Ch 1, sc in the same st and in each st to end of round, sl st to join.
4. Ch 1, sc in the same st, sc 5. (6sts) Leave remaining sts unworked.
5. Ch 1, turn, sc2tog, sc 4. (5sts)
6. Ch 1, turn, sc2tog, sc 3. (4sts)
7. Ch 1, turn, sc 4.
8. Ch 1, turn, sc2tog, sc 2. (3sts)
9. Ch 1, turn, sc2tog, sc. (2sts)
10. Ch 1, turn, sc2tog. Finish off and weave in ends.
11. Start in the next unused st on the collar left empty from step 4.
12. Repeat steps 4-11 four more times.
Finishing: This step is worked around the top/neck edge. With an I hook
and yarn to match the collar sl st in each st to end of round. Finish off
and weave in ends.
Trim: With a yarn needle and a long piece of worsted weight yarn
(Sample: White), wrap around the sts on the top edge of the neck.
Costume detail.
Collar Bells and Hat
Bells: Use a sewing needle and matching thread to sew a small bell at the end of each point.
Hat
1. With an H hook and worsted weight yarn (Sample: green),
start with a magic circle of 6 sc sts (or preferred method of
starting a circle of 6 sc sts), pull closed and place a marker for
working in the round. (6sts)
2. *2sc in the next st, sc 2*, repeat once. (8sts)
3. *2sc in the next st, sc 3*, repeat once. (10sts)
4. *2sc in the next st, sc 4*, repeat once. (12sts)
5. *2sc in the next st, sc 5*, repeat once. (14sts)
6. *2sc in the next st, sc 6*, repeat once. (16sts)
7. *2sc in the next st, sc 7*, repeat once. (18sts)
8. *2sc in the next st, sc 8*, repeat once. (20sts)
9. *2sc in the next st, sc 9*, repeat once. (22sts)
10. *2sc in the next st, sc 10*, repeat once. (24sts)
11. *2sc in the next st, sc 11*, repeat once. (26sts)
12. *2sc in the next st, sc 12*, repeat once. (28sts)
13. *2sc in the next st, sc 13*, repeat once. (30sts)
14. Sl st in the next st. Finish off the current yarn and change to worsted weight yarn (Sample: Red). This is the
new start of the round. Ch 1, sc in the same st and in each st to end of round, sl st to join.
15. Ch 1, FPSC around each post to end of round, sl st to join.
16. Ch 1, sc in the same st, sc 5. (6sts) Leave remaining sts unworked.
17. Ch 1, turn, sc2tog, sc 2, sc2tog. (4sts)
18. Ch 1, turn, sc2tog, sc2tog. (2sts)
19. Ch 1, turn, sc2tog. Finish off and weave in ends.
20. This step starts the next point. Start in the next unused st on the collar left empty from step 16. See photo at
right.
21. Repeat steps 16-19 four more times.
Hat Finishing and Pompom
Tip: I used the yarn tail from each point to sew the tip to the hat. This helps the peaks stand.
Finishing: This step is worked around the bottom edge of the hat. With an H hook and yarn to match the bottom
edge, ch 1, sc in the same st and in each st to end of round, sl st to join. Finish off and weave in ends.
Trim: With a yarn needle and a long piece of worsted weight yarn (Sample: White), wrap around the sts on the
bottom edge of the hat.
Bells: Use a sewing needle and matching thread to sew a small bell at the end of each point.
Pompom: Cut a piece of matching yarn 8” long. This will be used to tie around the middle of the pompom. Set
aside.
1. Wrap 1-2 strands of yarn (Sample: Red, White) around 4 fingers of your hand 8-12 times.
2. Carefully slide the loops off your hand.
3. Use the 8” piece to wrap around the middle of the yarn loops and snugly tie a knot.
4. Hold onto the ends of this piece of yarn.
5. Trim the loops and pom as desired.
6. Use the yarn tails to tie the pompom to the tip of the hat.
A few thoughts: After putting my hat
together I wasn’t really happy with it.
When I turned it around and the peaks of
the hat were more centered I liked it much
better. I wanted to let you know in case
you want to pay attention to the peaks
when you choose where the ears and chin
strap will be attached.
Also, the hat is cute by itself and with or
without ears and hair.
Optional Ears and Hair
Optional hat, ears, and hair.
Optional – Ears
Make 1 each so the ears both slant backwards when right side is up.
First Ear
1. With an H hook and flesh color yarn, create a magic circle of 8 sc sts (or preferred method for starting a circle of
8 sc sts), pull closed and sl st to join. (8sts)
2. (hdc, dc) in next st. Ch 1, turn, sl st in side of post of the last st, sl st in next st on circle and in each st around, ch 2,
sl st in first st. Finish off, leaving a long tail for sewing ear to hat.
Second Ear
1. With an H hook and flesh color yarn, create a magic circle of 8 sc sts (or preferred method for starting a circle of
8 sc sts), pull closed and sl st to join. (8sts)
2. (hdc, dc) in next st. Ch 1, sl st in side of post of the last st, sl st in next st on circle and in each st around, ch 2, sl st
in first st. Finish off, leaving a long tail for sewing ear to hat.
With a yarn needle, use each yarn tail to sew the ears to the bottom edge of the hat, at the same spots as the chin
straps.
Hair (optional)
This is a separate piece that is crocheted and then sewn to the inside of the hat. This could be used with other
hats as well.
1. With an H hook and yarn color for the hair (Sample: Yellow), ch 29, sc in the 2nd ch from hook and in each ch
across. (28sts)
2. Turn, *ch 4, sl st in next st*, repeat to end of row. Finish off and weave in ends.
Optional – extra hair. Choose one of the following:
Ringlets:
With an H hook and worsted weight yarn for the hair, ch 40, 2sc in the 2nd ch from hook, *sk 1, 3sc in the next
ch*, repeat to end of chain. Finish off, leaving yarn tails at each end.
Fold the ringlets in half and use the yarn tails to tie the end in the same spot as the chin strap.
Braids (make 2)
Cut 12 strands of yarn (same color as hair) 20” long and one piece 6” long (to wrap around bottom of braid). Pull
strands through sts at the side of the headband, next to the hair section. Divide in thirds and braid hair strands.
Wrap small strand around bottom of braid and tie a knot.
Optional: Tie a small piece of ribbon around the bottom of the braid.
Repeat for second braid.
Chin Strap and Candy
Hat ties and chin strap.
Chin Strap
Fold the hat in half to find the placement for the ties. With an H hook and ww yarn
(white to match the goose), attach the yarn to an inside loop (so it doesn’t show on
the outside of the hat).
Ch 25. Finish off and tie a knot in the end of the chain. Repeat for the opposite side.
When ready, place the hat on the head and use the ties to tie a bow under the chin.
TIP: When crocheting the chin strap, I start with a long tail and work over the yarn
tail. This way I don’t have a yarn tail to weave in at the end.
Pull up a loop in the designated st. *ch 1, place yarn tail in front of main yarn, ch 1,
move yarn tail out of the way, ch 1*, repeat for 25 chains. See middle photo at right.
When chain is complete, tie the 2 yarn ends in a knot. Tie a knot in the end of the
braid. I pull the yarn tails apart so the yarn ends aren’t so separate.
Candy (optional)
1. With an H hook and worsted weight yarn (Sample: white), start with a magic
circle of 8 hdc sts (or preferred method of starting a circle of 8 hdc sts), pull closed
and place a marker for working in the round. (8sts) Finish off, leaving a long tail for
sewing in place.
2. Sl st in each st to end of round.
Use a yarn needle and red yarn to wrap around the outer edge of the circle.
Bow (optional): cut a piece of ribbon 12” long. Tie in a bow and place under the spot
for the candy.
Use the yarn tail to sew the candy to the collar or make multiple and sew down the
front for buttons.
More Christmas Elves!
Make a whole flock, from mini geese to big porch geese.
Pattern copyright Snappy Tots 2024. This pattern cannot be shared, copied or reproduced in part or whole. Items made from this pattern may be sold for profit.
Christmas in Snappyland The Littlest Christmas Elves! Free Mini Goose Elf Crochet Pattern Boy or girl, these tiny Christmas helpers are ready to spread some holiday cheer! Designed by Snappy Tots The elves have arrived in Snappyland! These little Christmas outfits are designed for my 7-inch Mini Dress Up Goose. With a few simple color…
Christmas Tree Wall Hanging — Part 2 A festive home for your Snappy Beans! In this part of our Celebration Countdown, we’re crocheting the wall hanging base and the three layered tree pieces. So many things still to come, including a Santa sack, toppers, and final assembly! Welcome back to Christmas in Snappyland! This is…
Snappy Tots • Thanksgiving Crochet A Little Handmade Happiness for Thanksgiving Let’s add a little snappiness to Thanksgiving! I’ve gathered 40 crochet patterns for decorating, dressing up your geese, helping in the kitchen and making the holiday a little more fun. There are festive wearables, friendly turkeys, pumpkins and practical projects you can enjoy long…
🫘❤️🪿 Meet the Snappy Beans! A little Bean, a whole lot of possibilities! Tiny crocheted friends with BIG personalities! Make a few little friends, then have fun dressing them up for your next celebration. Oh my goodness, you guys! I have been having SO much fun with these little characters! When I started designing my…
🎄🪿❤️ Snappy Celebration Countdown A Free Christmas Crochet-Along! Two festive projects, lots of tiny friends, and a whole lot of Snappy fun! Welcome to Christmas in Snappyland! I love Christmas countdowns. There’s just something magical about having a little surprise to look forward to each day. Of course, I couldn’t make just an ordinary countdown….
I’ve made several hanging towels and my favorite ones are the simple ones that flip over a bar or around a handle and don’t need any extra hardware like buttons. I hope you will enjoy creating this simple texture and want to create a matching set. Similar patterns you might enjoy: Stitch Placement Help Video…